People | Academics | Product Design

Chairperson
Dr. Siti Suhaily Surip
Qualifications
BDES Industrial Design (UiTM), MDES in Design & Technology (UiTM), PhD in Science Materials (USM)
Biodata
Dr. Siti Suhaily Surip holds a Bachelor’s (Industrial Design) and Master’s degree (Design & Technology)) from the University of Technology Mara, Shah Alam, Selangor. Meanwhile, in 2017 he received her Doctor of Philosophy in Science Materials (Bio-composites & biomass fibre) from the School of Industrial Technology, University of Science Malaysia. She has served as a Lecturer in the Department of Product Design, School of The Art, Universiti Sains Malaysia (USM), Penang since 2007. In 2011 she was appointed as Senior Lecturer. She has been a member of the Malaysian Design Council (MRM), Malaysian Bamboo Society (MBS), Penulis & Pembaca Muar Johor, IRED Research Group and others. She has won several design competitions including 1st Place Award (university category) and Overall Best Design Award (open category) organized by the Ministry of Tourism, Penang in 2011, finalist of the Malaysian Youth Design Award 2012. Recently, she won Gold Medal for Wood Invention & Innovation competition Design 2019 (professional category) for the research title of Laminated Bamboo Hybrid Bio-composites For Furniture Components. In addition to teaching, she has written in books/ chapter in books/ journal publications in high index journal (ISI) to share her ideas with the community about the knowledge gained from the research conducted.
Personal Statement
Today is an era whereby artists, designers must work together with scientists, engineers and technologists. Through collaboration of various fields, we are sure to produce better products to not only enhance creativity but benefit the community too. I believe that as an artist/designer, we contribute back to our community.
*My Publication Profile : SCOPUS ID: 54384197200 / ORCID: https://orcid.org/0000-0002-9309-3351
Publications :
S. Siti Suhaily &Abdul Khalil H.P.S., 2020, Bio-komposit Hibrid Berlaminasi: Reka Bentuk dan Pembuatan, Penerbit USM. Research/ Academic Book (Final Review)
S. Siti Suhaily, Deepu A. Gopakumar, N.A. Sri Aprilia, Samsul Rizal, M.T. Paridah & Abdul Khalil H.P.S., 2019, Evaluation of Screw Pulling and Felxural Strength of bamboo-based Oil Palm Trunk Veneer Hybrid Biocomposites Intended for Furniture Applications. BioResources, pp.14(4),8376-8390
Siti Suhaily, S., Abdul Khalil H.P.S., Shamsul, R., Chaturbhuj K. Saurabh, Paridah M. Tahir, Enih Rosamah & Mohamed, A.S.A., 2019, Laminated Hybrid Biocomposites of Bamboo and Palm Veneer for Furniture Design. Biocomposite Express pp.4
Siti Suhaily, S., Abdul Khalil H.P.S., Nurul Fazita, and M.R., Syakir, M.I., 2017, Design of Green Laminated Composites From Agricultural Biomass, in (Lignosellulosic Fibre and Biomass-Based Composite Materials. Processing, properties, and Applications.), Woodhead Publishing Limited , 291-30
Siti Suhaily, S., Alwani, S. A.A., and Abdul Khalil, H.P.S., 2014, Bamboo Based Biocomposites Material, Design, And Applications., in (Materials Science – Advanced Topics), Intermediate Technology Publication.
Siti Suhaily, S., Jawaid, M., Abdul Khalil H.P.S.,Mohamed, A.R., & Ibrahim, F., 2012, A review on agro-based biocomposites for furniture design and applications: Potential and challenges., Review of oil palm composites. BioResources, 7(3), pp.4400-4423
Abdul Khalil H.P.S., Siti Suhaily, S., 2012, Cell wall morphology, chemical and thermal analysis of cultivated pineapple leaf fibres for industrial applications., Journal of Polymers and the Environment, Volume 1 / 1993 – Volume 19 / 2011
Mohamed, A.S.A. and Siti Suhaily, S., 2019. Real-time interactive cultural dance with gesture gaming elements via kinect-based skeleton tracking., 6th International Conference on Local Knowledge 2016 (ICLK 2016).
Siti Suhaily, S., 2019. The Green Gold: Bamboo As An Emerging Resource In Furniture Industry. International Conference On Design Industries & Creative Culture (Decoded 2019), Mangrove Tourism Complex, Kedah, Malaysia. 19 – 20 June 2019.
Siti Suhaily, S., Shamsu, M., Majid, M.Z., Yassin, H.R., and Md Esa, M.F, 2019. The Green Gold: Bamboo As An Emerging Resource In Furniture Industry. 6th University-Community Engagement International Conference 2019, Serambi Suluh Hall, D’Seni Brunei and Handicraft, Bandar Seri Begawan, Brunei Darulssalam. 19 – 20 Nov. 2019.
A.S.A. Mohamed, P.S. Chingeng, Siti Suhaily, S., N.A. Mat Isa, S., 2017, Body Matching Algorithm Design Using Normalize Dynamic Time Warping (NDTW) Skeleton Tracking for Malay Traditional Dance Movement, Advances in Visual Informatics: 5th International Visual Informatics Conference (IVIC 2017), Bangi, Malaysia, Nov. 28–30 2017.
Shamsu, M. and Siti Suhaily, S., 2016, Atap Singgora Pada Senibina Tradisional dan Kontemporari Di Pantai Timur, 2nd International Conference on Creative Media, Design & Technology (REKA 2016).
Mohamed, A.S.A. and Siti Suhaily, S., 2016. Real-Time Interactive Cultural Dance With Gesture Gaming Elements Via Kinect-Based Skeleton Tracking, 6th International Conference on Local Knowledge 2016 (ICLK 2016).
Mohamed, A.S.A., A., Muhammad and Siti Suhaily, S., 2016, Interactive Design Sign Language Interpreter Using Skeleton Tracking, 3rd International Conference on Communication and Computer Engineering (iCoCoE 2016).
Mohamed, A.S.A., and Siti Suhaily, S., 2016, Preserving Bahasa Malaysia Sign Language Using Skeleton Tracking Motion Capture, 6th International Conference on Local Knowledge 2016 (ICLK 2016).
Siti Suhaily, S. and Fadilla M. Y., 2012. Pembangunan Reka Bentuk Permainan Tradisional Sebagai Alat Bantuan Pengajaran dan Pembelajaran Prasekolah, Persidangan Serantau Kearifan tempatan (ICLK 2012).
Siti Suhaily, S., 2011. The Effectiveness of Traditional Games as A Method of Playing While Learning Pre-School Children. The International Conference on Early Childhood and Special Education (ICECSE 2011).
Research:
2018- 2020 (Short Term Grantt) – Siti Suhaily Surip, Abdul Khalil H.P. Shawkataly. The Development of Laminated Hybrid Bio-composites From Gigantochloa levis with Palm Veneer for Furniture Design, RM35,613.00. (Active)
2018- 2019 (BJIM University- Community Grant )- Siti Suhaily Surip, Shamsu Mohamad, Ahmad Zuhairi Abd. Majid, Hafeezur Rahmaan Mohd Yassin & Mohd Firdaus Mohd Esa. Empowering Special Education Students and Practicing Ceramic Craft Design Skills to Help Develop Potential Skills of the Students, RM10,000.00. (Completed).
2018-Ministry of Education, China)- Siti Suhaily Surip, Ng Shi Yi. The 4th “The Belt & Road” International Culture & Art Week, Sichuan Province, Chengdu, Republic of China, RM9,600.00. (Completed).
2012-2015 (RU Grant) – Abdul Khalil H.P. Shawkataly, Siti Suhaily Surip, Studies On The Fundamental Properties of Cellulosic fibres Of Selected Cultivated Bamboo Species. RM108,000.00. (Completed).
2008-2009 (Incentive Grant) – Siti Suhaily Surip (Principal), Mohamad Omar Bidin. Basic Mobile Phone Design: A Comparison Study Between Basic & Current Design for Consumer’s Perception, RM5,000.00. (Completed).
Exhibition:
2019- Wood Invention & Innovation Design (WIID2019). Universiti Teknologi Mara & Majlis Rekabentuk Malaysia (MRM).
2017- Oasis Exhibition on Art & Design (OASIS). Schoolf of The Arts,Universiti Sains Malaysia and Galeri Tuanku Fauziah USM.
2011- Contemporary Lantern Night Design Competition. Ministry of Tourism Penang, Malaysia & Majlis Bandaraya Pulau Pinang.
2008- Oasis Exhibition on Art & Design (OASIS). Schoolf of The Arts,Universiti Sains Malaysia & Muzium and Galeri Tuanku Fauziah USM.
2008- International Exhibition on Art & Design. Songkla Art Gallery, Thailand & Schoolf of The Arts,Universiti Sains Malaysia
Community Works:
2019- School Excellence Annual Award, SMK Pendidikan Khas Persekutuan Pulau Pinang, Tanjung Bungah, Pulau Pinang.
2019- Kindergarten Annual Concert, USM Minden Kindergarten, USM Minden Kindergarten Cooperative, Universiti Sains Malaysia, Penang.
2019- Exhibition on Ceramic Craft Design with Disable Students, SMK Pendidikan Khas Persekutuan Pulau Pinang, Tanjung Bungah, Pulau Pinang.
2019- USM Academic Day 2019, Universiti Sains Malaysia, Penang.
2019- MBS Annual Meeting & Family Day, Malaysian Bamboo Society (MBS), Forest Research Institute Malaysia (FRIM), Kepong Selangor.
2019- Bakti Siswa, SMK Kg. Chicar, Jeniang Kedah. Universiti Sains Malaysia.
2019- Design Workshop on Ceramic Craft Design with Disable Students, SMK Pendidikan Khas Persekutuan Pulau Pinang, Tanjung Bungah, Pulau Pinang.
2018- Motivational Talk with Disable Students, SMK Pendidikan Khas Persekutuan Pulau Pinang, Tanjung Bungah, Pulau Pinang.
2018- Community Project with Indigenous People, Kg. Cermin, Kampar Perak. Universiti Sains Malaysia.
2018- Mentor Mentee USM. Universiti Sains Malaysia, Penang.
2018- Kindergarten Annual Concert, USM Minden Kindergarten, Minden kindergarten Cooperative, Universiti Sains Malaysia, Penang.
2018- Design Workshop on Ceramic Craft Design with Disable Students, SMK Pendidikan Khas Persekutuan Pulau Pinang, Tanjung Bungah, Pulau Pinang.
2017- Bakti Siswa USM, Kg. Chicar, Jeniang Kedah. Universiti Sains Malaysia.
2015- Green Design Competition, Category University/ College (Chief jury), 1st Avenue Sdn. Bhd. and One Academy, Penang.
2012- Bakti Siswa USM, Ferringhi Beach, Penang. Majlis Bandaraya Pulau Pinang & Universiti Sains Malaysia.
2012- Penang Boat Festival (Jury), Ferringhi Beach, Penang. Majlis Bandaraya Pulau Pinang.
2010- Program Rantau Budaya (Cross Cultural), Kg. Perlis, Penang. Dewan Budaya, School of The Arts & Universiti Sains Malaysia.
2010- Academic & Cultural Visit, Bandung Art School, Bandung Indonesia. School of The Arts, Universiti Sains Malaysia.
2009- Penang e-Creative Competition (Jury), School of The Arts & Universiti Sains Malaysia, Penang.
2008- Program Rantau Budaya (Cross Cultural), Kg. Cherok Paloh, Pahang. Dewan Budaya, School of The Arts & Universiti Sains Malaysia.
Awards/ Recognition/ Professional Qualification:
2019- Gold Award (Category Profesional). Wood Invention & Innovation Design 2019. Universiti Teknologi Mara & Majlis Rekabentuk Malaysia (MRM).
2019- Excellent Service Award. School of The Arts, Universiti Sains Malaysia.
2013- Finalist (Category Industrial Design). Anugerah Harta Intelek Negara 2013. Kementerian Perdagangan Dalam Negeri, Koperasi & Kepenggunaan
2012- Finalist (Category Profesional). Malaysia Design Award 2012. Malaysia Design Centre (MRM)
2012- Academic Scholarship Award. Malaysian Higher Education (KPT) / Universiti Sains Malaysia.
2011- 1st Winner (Category University). Contemporary Lantern Night Design Competition 2011. Ministry of Tourism Penang, Malaysia & Majlis Bandaraya Pulau Pinang.
2011- Overall Winner (Category Open). Contemporary Lantern Night Design Competition 2011. Ministry of Tourism Penang, Malaysia & Majlis Bandaraya Pulau Pinang.
2010- AutoCAD Autodesk Certificate (Associate Level), Prestariang System Sdn. Bhd. Cyberjaya, Malaysia
2005- Star Workers’ Award.Bristol Technologies Sdn. Bhd., Selangor.
Consultation:
2011- Global Higher Education Forum (GHC 2011). Equatorial Hotel, Penang – Booth design, Layout plan, Poster, Souvenir & Interior.
2009– International Conference of Commonwealth Ministers Country (ICCM 2019). Kuala Lumpur Convention Center (KLCC), Kuala Lumpur – Booth design, Poster & Souvenir
Course Listing:
VPT 113 Technical Drawing 1
VPT 212E Technical Drawing 2 (AutoCAD)
VPT 215 Product Design 1
VRA 103Visual Studio Practice 1
HTV 201 Thinking Technique
VPT 411 Industrial Design Project 1
VPT 412 Industrial Design Project 2
Email:suhaily@usm.my

Lecturer
Dr. Ahmad Zuhairi Abdul Majid
Qualifications
PhD. (Industrial Design), Universiti Malaysia Sarawak, 2012.
MA (Industrial Design), Universiti Teknologi Mara, Shah Alam, Selangor, Malaysia, 2004
B.Des (Industrial Design), Universiti Teknologi Mara, Shah Alam, Selangor, Malaysia, 1990
Biodata
Dr. Ahmad Zuhairi Abdul Majid has vast experience in product design since he joined the automotive and telecommunications industries in Selangor and Kuala Lumpur in the 1990’s. It began after he received his tertiary education in the Art and Design at ITM, Shah Alam in 1985. In year 2001 he continued to obtain his Master’s degree at UiTM, Shah Alam. In 2000 he began his career as an academician at higher learning provider such as Universiti Putra Malaysia and Multimedia University until he moved to Universiti Sains Malaysia in 2006. He continued his research through Phd studies at Universiti Malaysia Sarawak in 2009 and is currently a senior lecturer in Product Design programme at the School of the Arts, Universiti Sains Malaysia, Penang. In addition to contributing to the industry in product research and development, he is also active in innovative service design research as well as keeping up with CAD/CAID technology.
Personal Statement
Functional aesthetics is important to me as a designer. I emphasize on functionality of a product while at the same time pay attention to beauty of the product too… as this is what a consumer wants, both function and beauty. As a designer, we must always look out for new ideas, materials and purposes to produce our work/product.
Publications
2018, A Review on Practicing Service Design Process for Product Design Students at
Universiti Sains Malaysia, , International Service Innovation Design, National Intangible
Heritage Center, Jeonju-si, Republic of Korea.,
2018, Intercity Express Bus Seatbelt Design Awareness in Peninsular Malaysia, ,
International Service Innovation Design, National Intangible Heritage Center, Jeonju-si,
Republic of Korea.,
2018, Principles and the Understanding of Service Innovation in Design Education, ,
Advances in Social Science, Education and Humanities Research, Surakarta, Indonesia,
2018, What Drives The Riders Do Personalizing Activity Toward Their Motorbike?, ,
Advances in Social Science, Education and Humanities Research, Surakarta, Indonesia,
Refereed Proceeding
Revitalization of George Town Tourism Services with The Adaptation of Service Innovation Approach, ICLK, National Art Gallery Kuala Lumpur, 14/11/2018-15/11/2018
2018, Users That Do Personalizing Activity Toward Their Belonging, , Advances in Economics, Business and Management Research, Bandung, Indonesia,
2018, A method of investigating the ageing perception and satisfaction towards product appearances., Advances in Economics, Business and Management Research, Bandung, Indonesia,
2018, Intercity express bus safety design issues in peninsular Malaysia, , Advance in Economicc, Business and Management Research, Bandung, indonesia,
2018, Ergonomics Review: Identifying Discomfort Seating Posture Among Elderly Taxi Drivers at Malaysian Perspective., , Advanced Economics, Business and Management Research, Bandung, indonesia,
Assessment on Sitting Posture Relation to Risk Factors by Using Chisquare Test Among Elderly Taxi Drivers in Peninsular Malaysia, Journal of the Malaysian Institute of Planners, 2018.
Ahmad Zuhairi Abdul Majid, Justification of Service Innovation Strategy, International Journal of Science Commerce and Humanities, 2018, Vol. No. 6 No. 1 May 2018
Ahmad Rizal Abdul Rahman dan Ahmad Zuhairi Abdul Majid, 2017, Buku: Asas Penyelidikan dalam Reka Bentuk, Universiti Putra Malaysia.
Ahmad Zuhairi Abdul Majid, Norfarizah M. Bakhir, Hafeezur Rahmaan Mohd Yassin, 2017, Tensile Strength of Banana Stem and Bamboo Fibres as Alternative Material in Making Craft Products, , 7th International Conference of Local Knowledge (ICLK 2017), The Puteri Pacfic Hotel Johor Bahru Malaysia.
Ergonomic Perspective: Awkward body posture causing health problem among elderly taxi drivers in Malaysia, Social Sciences Postgraduate International Seminar (SSPIS2017), sains@usm, Bukit Jambul Penang.,
Irwan shah Md Yusoff, Ahmad Zuhairi Abdul Majid, Shamsul Bahri Mohd Tamrin, Determinants of characteristics and discomfort on seating posture among elderly taxi drivers: a pilot study result., Malaysian Journal of Human Factor and Ergonomics2016 Vol. 1, 2016, 1, 1, 10
Irwan Syah Md Yusoff, Ahmad Zuhairi Abdul Majid, 2016, To investigate The Association Between Current Car Seat Design with body Posture for reducing Musculoskeletal Disorders (MSD) Through Ergonomics Principles Among Malaysian Elderly Drivers., , 2nd International Conference on Creative Media, Design & Technology (REKA) 2016 Proceeding., School of The Arts,
Siti Zubaidah Ibrahim, Ahmad Zuhairi Abdul Majid, Jasni Dolah, 2016, Kajian Rekabentuk Sistem Keselamatan (Tali pinggang) bagi penumpang bas komersial si semenanjung malaysia, , 2nd International Conference on Creative Media Design & Technology (REKA) School Of The Arts USM,
Hafeezur Rahmaan Mohd Yassin, Chooi Wei Yee, Ahmad Zuhairi Abdul Majid, Mohamad Omar Bidin, 2016, Enhance Movie-Goers Cinema Experience, , 2nd International Conference on Creative Media Design And Techonology REKA 2016, School of Art USM,
Nurazlina Jamalludin, Ahmad Zuhairi Abdul Majid, Jasni Dolah, Mohamat Najib Mat Noor, 2016, Aging Perception Towards Appearance and products satisfaction, , 2nd International Conference on Creative Media, Design and Technology (REKA2016), School of Art,
Syarul Amizul Azizan dan Ahmad Zuhairi Abdul Majid, Mengglobalisasikan Penggunaan Serat Batang Pisang Tempatan dalam Penghasilan Struktur Sokongan Pembungkusan Produk Teknologi Maklumat dan Komunikasi., Penerokaan Teknologi Melalui Seni dan Warisan dalam Kearifan Tempatan, Penerbit USM, 2015.
Nur Syafawati Hamim and Ahmad Zuhairi Abdul Majid, 2015, Service Innovation Design Towards Ticketing System at Sungai Nibong Terminal, , Conference Proceeding 1st International Conference on Creative Media, Design & Technology, School of The Arts, 225-230
Ooi Boon Jiet and Ahmad Zuhairi Abdul Majid, 2015, Retail Efficiency and Productivity Enhancement Through Ergonomic Design, Conference Proceeding 1st International Conference on Creative Media, Design & Technology, School of The Arts,
Ahmad Zuhairi Abdul Majid, 2015, Transmit: Siri Esei dan Kajian Praktis Studio Seni. Editor: Mohammad Khizal, Fauzan Omar, Izmer Ahmad dan Shahrul Anuar Shaari., Pusat Pengajian Seni USM,
Editors-in-chief Nasir Baharuddin, Rahinah Ibrahim and Raja Ahmad Azmeer Jury Reviewer Ahmad Zuhairi Abdul Majid , 2013, STEDEX 13 Sustainable Tropical Environmental Design Exhibition Vol.5 2013, UPM,
Validation on Proposals for Strategic Service Innovation at Automobile Service Center, National Cheng Kung University Tainan, Taiwan., 22/10/2012- 24/10/2012, International
Ahmad zuhairi Abdul Majid Nazlina Shaari Saiful Bahari Mohd Yusoff, 2011, Design Approach for Customers Experience in Services, 3rd International Conference on Applied and Creative Arts 2011, Universiti Malaysia Sarawak.
Proceedings in the 2010 International Joint Conference on Design Yonsei University (Wonju Campus), 22-23 October 2010 (title: Wealth Creation Through Service Innovation Design in Malaysia), Wonju, South Korea, 22/10/2010- 23/10/2010, International
Design Strategy for Designing a Service in Malaysia, Future University Hakodate, Japan., 18/10/2010- 20/10/2010, International
Mohd Fazidin Jabar and Ahmad Zuhairi Abdul Majid, 2002, 7th International Conference on Computer Aided Architectural Design Research In Asia (CAADRIA)(Principles and Methods of Interface Design), Prentice Hall, 321
Research
FRGS, MoE- The New Foundation for Fabrication of Kelantan’s Rebab Utilizing the New Traditional Product Development Plan for Commercialization. RM55,220.00, 1/09/2019 – 31/08/2021
Bridging Grant USM -The Application Of Service Innovation For Eco-Tourism In Penang And Perak, RM5,000.00, 15/06/2019-14/06/2020
Short Term Grant USM – Penggunaan Serat Asli Dalam Merekabentuk Komponen Ruang Dalaman Bas Transit Sebagai Artifak “Servicescape” Yang Membantu Kesempurnaan Perkhidmatan Pengangkutan Awam di Pulau Pinang , RM29,997.10, 01/09/2014-31/08/2016
Awards
· Hadiah Sanjungan, USM, 2009, National
· Anugerah Perkhidmatan Cemerlang, Universiti Sains Malaysia, 2014.
· 1st Prize NSTPeugeot Design Competition 2013, NST PeugeotNSTPeugeot
· Korea Society of Design Trend Awards, Korea Society of Design Trend, Silver Medal KSDT 2016, 2016, International
Course Listings
· VPT112 Computer Modelling 3D
· VRT301 Design Research Methodology
· VPT304 Product Design Management
· VPT411 Final Project1
· VPT412 Final Project2
Email:zuhairi.majid@usm.my
Ext:4072 / 3061

Lecturer
Pn Noor Azlina Mohamed Khalid
Qualifications
- 2007-2009: MDes (Industrial Design), Swinburne University of Technology, Melbourne, Australia.
- 1999-2000: BDes (Hons) (Industrial Design), Universiti Teknologi Mara, Selangor, Malaysia.
- 1995-1999: BDes (Industrial Design), Universiti Teknologi Mara, Selangor, Malaysia.
Personal Statement
My research interests include Design for Healthcare, Design for Disability, Universal Design, Design Thinking, and recently, Environment-Behaviour interaction. In addition to collaborative across disciplines through Co-Design approach, I always believe that good product design requires an in depth understanding of the user and the environment.
Publications
Khalid, N.A.M., Latif, L. A., & Hussein, H. Understanding Therapeutic Sensory Stimulation Garden (TSSG) as a Rehabilitation Garden in a Healthcare Centre (2019), International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8(12S2).
Noor Azlina Mohamed Khalid (2016). Memahami Reka Bentuk Sejagat: Kajian Kes Di Taman Permainan Mudah Akses, Taman Perbandaran Pulau PInang, International Conference On Creative Media, Design and Technology (REKA 2016), ISBN 978-976-13104-1-0,p.722-730
Wahyuni Masyidah M. Isa, Noor Azlina Mohamed Khalid, & Muhammad Fauzi Zainuddin (2016). Sitting Posture Amongst Level One Primary Schoolchildren (LOPS) In Perlis, Kedah and Pulau Pinang, International Conference On Creative Media, Design and Technology (REKA2016), ISBN 978-967-13104-1-0, p.421-431
Wahyuni Masyidah Md.Isa, Noor Azlina Mohamed Khalid, Muhammad Fauzi Zainuddin (2014). Peranan Ergonomik Dalam Rekabentuk Kerusi Sekolah: Kajian Kes di Sekitar Perlis, Kedah dan Pulau Pinang. International Conference on Creative Media, Design and Technology (REKA2014), ISBN 978-967-13104-0-3, p.349-354
Johari Jaffar, Mohamad Omar Bidin, & Noor Azlina Mohamed Khalid (2014). Peranan Rekabentuk Dalam Mengekalkan Keunikan Adat Dan Budaya Makan Masyarakat Melayu. International Conference on Creative Media, Design and Technology (REKA2014), ISBN 978-967-13104-0-3, p.355-360
Wahyuni Masyidah Md.Isa, Noor Azlina Mohamed Khalid, Muhammad Fauzi Zainuddin (2013). Mismatch Between Anthropometrics and Chairs Dimension of Primary School Children (Level 1) In Northern Region, Malaysia, The Convergence of The Performing and Creative Arts: Reimagining Methodologies and Traditions, Penerbit USM.
ISBN 978-983-861-569-3, p237-246
Noor Azlina Mohamed Khalid, Hafeezur Rahmaan Mohd Yassin & Norfarizah Mohd Bakhir (2012). Sumbangan Rekabentuk Perindustrian Dalam Merekayasa Permainan Tradisional: Satu Kajian Kes Ke atas Permainan ‘Tapak Gajah’. Persidangan Serantau Kearifan Tempatan (RCLK 2012): Merekayasa Kearifan Tempatan Ke Arah Ilmu Baharu.
Chapter In A Book
Noor Azlina Mohamed Khalid (2011). Lakaran dalam Senireka Perindustrian, Kompilasi Karya Esei: Pameran Karya Seni Visual STPM 2011, Pusat Pengajian Seni, USM.
Magazine
Azlina Khalid (2011). Knowledge & Skills Sharing: Sketching Techniques to SPM Students’, Buletin Dewan Budaya: Sulur Bayung, USM.
Azlina Khalid (2010), NEXTUS 2010: Student Furniture Design Competition, Buletin Dewan Budaya: Sulur Bayung, USM.
Research Grant
- ‘Exploring Sketching As A Tool Of Communication In Product Design Courses’
USM (Insentif Grant), RM5,000.00, 2/3/2011-1/3/2012, -(Principal Investigator) (Completed)
- ‘Kajian Ke atas Kerusi Sekolah Rendah Bagi Pelajar Tahun 1, 2 dan 3’
Universiti Sains Malaysia, 1/1/2010 – 31/12/2012 -(Principal Investigator) (Completed)
- ‘Natural Wood Stain: Focusing on Betel Nut’s Skin’
Incentive Grant, 2005-2006 -(Principal Investigator) (Completed)
- ‘To Identify, Design and Develop a Product for Commercialization from a Newly Developed Ceramic Based Material’
USM Short-term Grant, 2004 -(Co-Researcher) (Complet
Exhibition
- Drifting To Happiness (2022)
Noor Azlina Bt. Mohamed Khalid
PAMERAN OASIS 2022 “SENSORY”, PUSAT PENGAJIAN SENI, USM,
Muzium & Galeri Tuanku Fauziah (MGTF), Universiti Sains Malaysia. - Semangat alam (2017)
Noor Azlina Bt. Mohamed Khalid & Mohd Faidzal B. Ahmad
PAMERAN OASIS 2017 “WORLDING…THE ARTS” PUSAT PENGAJIAN SENI, USM,
Muzium & Galeri Tuanku Fauziah (MGTF), Universiti Sains Malaysia.
- Apophenia: Tarian Alam 1, 2, 3 (2017)
Noor Azlina Bt. Mohamed Khalid & Mohd Faidzal B. Ahmad
PAMERAN OASIS 2017 “WORLDING…THE ARTS” PUSAT PENGAJIAN SENI, USM,
Muzium & Galeri Tuanku Fauziah (MGTF), Universiti Sains Malaysia. - Childhood memories -Stopping By… (2016)
Noor Azlina Bt. Mohamed Khalid
World Art Design Festival 2016 Guri, Korea, - Life Disposed (2014)
Noor Azlina Bt. Mohamed Khalid
USM -Thaksin University Joint Exihibition. - Tapak Gajah: Connecting Traditions (2013)
Noor Azlina Bt. Mohamed Khalid
Korean Society of Design Trend (KSDT) – Malaysia International Design Invitational Exhibition - Tapak Gajah: Connecting Traditions (2013)
Noor Azlina Bt. Mohamed Khalid
OASIS, Muzium & Galeri Tuanku Fauziah (MGTF), Universiti Sains Malaysia - Halt for Life (2013)
Noor Azlina Bt. Mohamed Khalid
OASIS, Muzium & Galeri Tuanku Fauziah (MGTF),Universiti Sains Malaysia - Product Improvization (2011)
Noor Azlina Bt. Mohamed Khalid
USMCares -USM Creative Arts Embrace Sustainability, Muzium & Galeri Tuanku Fauziah
(MGTF), Universiti Sains Malaysia - Blue and Yello Composition I, II and III (2010)
Noor Azlina Bt. Mohamed Khalid
Contemporary Art Exhibition, Craft House Museum & Art Gallery,Hatyai, Songkla
Course Listings
-VPT412/4 Design Project 2 (Industrial Design)
-VPT411/4 Design Project I (Industrial Design)
-VPT305/3 Product Design 2
-VPT 304/3 Industrial Design Management
-VPT 220/10 Industrial Training (Industrial Design)
-VPT214/2 Ergonomic in Design
-VRA101/4 Elements and Principles of Design
-VRA108/2 Visual Studio Practice 2
-VRA103/2 Visual Studio Practice 1
-HFE224/2 Penghayatan Etika dan Peradaban (*University course)
Email: n_azlina@usm.my
Ext.:4652

Lecturer
Mr Alif Ikrami
Qualifications
Diploma in Industrial Design (Politeknik Johor Bahru), BFA (Hons) in Product Design (USM), MA in Fine Arts (USM)
Biodata
Mohd Alif Ikrami bin Mutti is a lecturer of Product Design Department in School of The Arts, University Sains Malaysia. He’s holding a Master of Arts (Fine Arts) from Universiti Sains Malaysia in 2017. Since 2007, he has held a several position in the industry such as Styling Designer, Cad Designer, Technician and Graphic Designer in various company involving fields of automotive, engineering, manufacturing and craft. In 2017, he started a freelance project as a furniture designer and maker while teaching as part-time lecturer in Faculty of Art and Design at Universiti Teknologi Mara (UiTM) and School of The Arts, USM. He is now a fulltime lecturer in USM.
Personal Statement
My field of interest include the area of Material and Process Studies, Universal and Inclusive Design, User Interaction and Behavior, Design in Culture and Heritage, and Design Styling in Product Design, Furniture Design and Transport Design. I cannot imagine the world without colours, lines, shapes, geometric precision, which leads to two key words in design – functional aesthethics.
Publications:
Mutti, M. A. I., Yassin, H. R, M. (2013). A Study of Three-Wheeler Bike Design For Urban Delivery Transpotation, BFA, Universiti Sains Malaysia, Gelugor.
Mutti, M. A. I., Bidin, M. O., Yassin, H. R. M. (2017). Kriteria Rekabentuk Hentian Bas: Kajian Kes Dalam Kampus Induk Universiti Sains Malaysia (USM), MA, Universiti Sains Malaysia
Mutti, M. A. I., Bidin, M. O., Yassin, H. R. M. (2015), Kajian Permasalahan Rekabentuk Hentian Bas Dalam Induk Universiti Sains Malaysia (USM), 1st International Conference On Creative Media, Design and Technology (REKA2014).
Bidin, M. O., Mutti, M. A. I., Yassin, H. R. M., (2018) Development of Bus Stop Design Guideline: Case Study in the Main Campus of Universiti Sains Malaysia (USM). 4th Bandung Creative Movement International Conference on Creative Industries 2017 (BCM2017).
Exhibitions:
‘a-MAZE-ing Scraps’ – USM Creative Arts Embrace Sustainability (USMCARES), – Muzium & Galeri Tuanku Fauziah, 2011
Merpati Trike – RINTIS SHIFT Final Year Project Exhibition, School of The Arts, 2013
Awards:
Gold Medal Award, Wood Invention and Innovation Design (WIID), 2019.
USM Fellowship Scholarship Award, 2014.
USM YC Lin Gold Medal Award (Applied Art), 2013.
Best Student Award for Product Design Final Exhibition, School of The Arts, 2013.
Gold Medal- Social Transformation and Creative Art, Novel Research & Innovation Competition (NRIC), 2013.
Prize of Honors (Applied Art) – USM Academic Conference 2011/2012, 2012.
1st Winner, Lantern Design Category in Penang Beat Prelude & Contemporary Lantern Night Festival, 2011.
First Class Degree Award, 44th USM Convocations Ceremony, 2013
The Best Student Award for Product Design Final Exhibition, School of The Arts, 2013.
Dean List – Semester 2 (2010/2011), Universiti Sains Malaysia
Dean List – Semester 3 (2011/2012), Universiti Sains Malaysia
Dean List – Semester 4 (2011/2012), Universiti Sains Malaysia
Dean List – Semester 5 (2012/2013), Universiti Sains Malaysia
Dean List – Semester 6 (2012/2013), Universiti Sains Malaysia
Course Listing:
VPT 111 – Teknik Pembuatan Model (Model Making Techniques)
VPT 216 – Rekabentuk Perabot 1 (Furniture Design 1)
VPT 306 – Rekabentuk Perabot 2 (Furniture Design 2)
VPT 412 – Projek Rekabentuk 2 (Design Project 2